D-Link DES-1008C/B 8 port 10/100Base-T Unmanaged Switch

D-Link DES-1008C/B 8 port 10/100Base-T Unmanaged Switch

The router has one LAN port free. Three computers, a NAS drive, and a smart TV all need wired connections. Adding a switch should take thirty seconds — not require a manual, a configuration interface, or a call to IT. The D-Link DES-1008C Fast Ethernet unmanaged switch gives eight ports from a single cable, draws almost no power, runs silently, and asks nothing of the user beyond plugging it in.

Eight Ports. No Setup. No Noise.

The DES-1008C is a plug-and-play unmanaged switch. Connect it to any available network port. Eight 10/100Mbps Fast Ethernet ports become immediately available. No software. No web interface. No configuration step. The switch detects each connected device automatically and begins forwarding traffic.

All eight ports operate at up to 100Mbps in full-duplex mode — a combined throughput of 200Mbps per port at maximum capacity. File sharing, media streaming, and standard office applications all run without interruption across all eight connections simultaneously.

D-Link Green Technology — Power Savings Built In

The DES-1008C implements IEEE 802.3az Energy Efficient Ethernet — D-Link Green Technology. Two automatic power-saving mechanisms run continuously without any user input.

The first detects when a connected device is switched off or when a port carries no traffic. The port enters standby mode immediately. Power drops to near zero on that port until traffic resumes. The second adjusts power output based on the physical length of the cable connected to each port. A shorter cable requires less power to drive the signal. The switch measures the cable and delivers only what is needed. Both mechanisms work together. A switch with several idle ports uses a fraction of its maximum rated power throughout a typical working day.

Auto MDI/MDIX — Any Cable, Any Port

Every port supports Auto MDI/MDIX crossover. Straight-through cables and crossover cables both work in any port without a manual switch or adapter. Connect a router, a computer, a printer, or another switch using whatever cable is available. The DES-1008C negotiates the connection automatically. No cable type mismatch is possible.

Fanless Design — Completely Silent

The DES-1008C has no fan. Passive cooling handles the minimal heat generated by the energy-efficient chipset. The switch runs silently in any environment — a desk drawer, a reception counter, a living room shelf, or a server cupboard where fan noise accumulates across multiple devices. Per-port LED indicators show link and activity status at a glance without requiring access to any management interface.

Verified Specifications

All data below is confirmed from the official D-Link DES-1008C product page and datasheet.

Ports and Performance

• Model: DES-1008C (Revision B)
• Ports: 8x 10/100Mbps Fast Ethernet RJ45
• Max Data Rate: 200Mbps per port (full-duplex)
• Switching Method: Store and Forward
• Flow Control: IEEE 802.3x full-duplex; back pressure half-duplex
• Auto MDI/MDIX: Yes — all ports
• Auto-Negotiation: Yes — 10/100Mbps and half/full-duplex
• LED Indicators: Per-port link and activity
• Setup: Plug-and-play — no drivers, software, or configuration required

Power and Build

• Energy Standard: IEEE 802.3az Energy Efficient Ethernet (D-Link Green)
• Power Saving 1: Auto standby on idle or disconnected ports
• Power Saving 2: Cable-length-optimised power per port
• Cooling: Fanless — passive silent operation
• Form Factor: Compact desktop
• Network Standards: IEEE 802.3 10BASE-T / IEEE 802.3u 100BASE-TX / IEEE 802.3x / IEEE 802.3az

Where the DES-1008C Gets the Work Done

The Home Office With One Router Port and Multiple Devices

A home router delivers one wired port to the desk. The desktop PC, the NAS, and the work laptop all need stable wired connections. The DES-1008C plugs into that single router port and delivers eight. Each device gets its own dedicated port at up to 100Mbps. The fanless build sits quietly on the desk or inside a cable management box. D-Link Green technology reduces the running cost to near zero when devices are idle or switched off overnight. Browse the full range of network switches and Ethernet accessories at Big Mind Technologies for compatible patch cables and network accessories.

The Small Office Connecting a Workgroup

Four workstations share a printer, a file server, and an internet connection. The DES-1008C connects all four to the network from a single router port — with four ports remaining for future expansion. No IT setup is required. No configuration is needed when a new device joins the network. Plug in the cable and the connection establishes automatically. The compact design fits in a desk drawer, on a cable tray, or behind a monitor stand without occupying meaningful desk space.

The Classroom or Training Room With Multiple Computers

A computer lab with eight workstations needs a reliable, low-maintenance switch that a teacher can operate without technical support. The DES-1008C connects all eight from one network drop. It requires no ongoing management. The per-port LEDs confirm which machines are connected and active at a glance. The fanless silent build does not add noise to a classroom environment. Full product specifications are available on the official D-Link DES-1008C product page.

The User Who Needs More Ports — Nothing More

Some network requirements are simple. More wired ports. Reliable connections. Low running cost. The DES-1008C fulfils all three without adding complexity. It does not require a managed switch, a PoE budget calculation, or a rack space allocation. It sits wherever it is needed, runs silently, and draws only the power its connected devices require.

The Big Mind Technologies Guarantee

Big Mind Technologies supplies genuine D-Link products backed by full manufacturer warranty coverage. The D-Link DES-1008C/B ships ready to use — plug it in and the network expands immediately. Contact our team before purchase to confirm compatibility with your existing network infrastructure or router.